Iso/Cue "loader" works on real hardware :]
Written by cafealpha
no comments
Classified in : etc, Saturn, Programming, Mylife
I finally had time to use my Saturn, and I could verify that iso/cue "loader" works on real hardware !
Of course it works well when reading from RomFs, and it works also well when reading file from SD card
My test environment ... sorry for the mess
(Micro SD card is located on top-left of the cartridge)
I lost some time to understand why data transfer from SD card was slower than expected, but finally understand why : some debug/whatever delay routine was called when accessing cartridge registers ...
Just putting some #if 0 around this delay code solved the "problem" ^^;